Product

一、Business

“Bright Aviation” provides product supply, after-sales service, technical consultation, spare parts support and other services.

二、Overview

1. RF relay, in the airport air traffic control equipment, is mainly used for the main and standby switching of two RF signals.

2. The two RF input signals of the relay are switched by the relay, one is connected to the transmitting antenna system, and the other is connected to the dummy load system,

3. RF relay can be divided into single pole (two in and one out) and double pole (two in and two out).

三、Characteristics

（一）R577443010

1. Operating Frequency: 0 to 18GHz.

2. Control Voltage: 28V DC.

3. Connector Type: SMA female.

4. Double pole type, 2-channel RF signal input, 2-channel RF signal output.

4. Switching Times: ≥ 100000 times.

5. Application Equipment:  Airport ILS, DME, DVOR equipment, etc.

6. Product appearance, as shown in the figure below.

（二）R570013000

1. Operating Frequency: 0 to 3GHz.

2. Control Voltage: 28V DC.

3. Connector Type: N-Type Female.

4. single pole, two RF signal inputs, one RF output.

5. Switching Times: ≥ 100000 times.

6. Application Equipment: VHF radio, etc.

7. Product appearance, as shown in the figure below.

（三）R570313000

1. Operating Frequency: 0 to 3GHz.

2. Control Voltage: 28V DC.

3. Connector Type: N-Type Female.

4. Single pole, 2-way RF signal input, 1-way RF output.

5. Switching Times: ≥ 100000 times.

6. Application Equipment: VHF radio, etc.

7. Product appearance, as shown in the figure below.